ZP Series ZINC Coated
Hard Wire for Japanese Models
ZD Series ZINC
Coated Hard Wire for European Models BP Series
Brass Hard Wire for Japanese Models BD Series
Brass Hard Wire for European Models
Coated Wire Features: 20~30% Faster Cutting than Brass Wire!
Acid-Corrosion and No Damage to Resins: The special
treatment avoids acid-corrosion on machine and work piece.
Filtered water and pH will not be damaged. Thus lengthens
the life span of the ion resins.
Surface Quality: The special treatment makes wire
surface smooth, free from dirt, rust and grease that causes
inefficient electric discharge.
Weight Control: By perfect control in process,
we obtain the standard weight per coil that enables us
to maintain the processing time stability and the drawing
accuracy, this ensures the stable quality of wire.
Weldment: The rough surface caused by welding
could affect the quality and accuracy of performance.
The welded wire tends to break which results in lost time
Due to the control system of diamond dies and lubricant,
wire diameter tolerance and roundness tolerance are both
limited to 1/µm. No scratch, cracking, twisting
and deformation can be found on our wire.
Straightness: The outstanding straightness and
quality of NEW Gromax Zinc Coated wire ensures
smooth automatic threading.
cutting (rough and finish)
cutting (rough, finish and re-finish
cutting (relief under 10°)
cutting (relief 10°-20°)
cutting (relief over 20°)
Coated Wire: CU 65% / ZN 35%
Brass Wire, Zinc Enriched: CU 60% / ZN 40%