|
|
Machine
Bed: The machine bed is made of high quality "MEEHANITE"
cast iron and has aging treatment. No distortion. Machine bed
and slides are also heat treatment and precision ground. No
worn out. |
|
|
Gear
Box: All
gears are made of SNCM220 alloy steel having been normalized,
carburized hardened and precision ground. No vibration and low
noice. |
|
|
Servo
Motor for Regulating Wheel:
Japanese servo motor is used as the regulating wheel motor which
provides infinitely variable speed change from 0~295rpm and
can be adjusted to ideal linear speed. The servo motor is driven
directly by worm and worm gear. This can reduce vibration during
grinding and consequently achieve the best roundness. |
|
|
Regulating
Wheel Dressing Unit: The
angle of the regulating wheel dressing unit can be swivelled
according to workpiece requirements in order to enhance accuracy. |
|
|
Spindle:
The
grinding and regulating wheel spindles are made of high quality
alloy steel (SNCM439), induction hardened superfinished. They
are sturdy and strong enough to permit heavy duty grinding at
high speed and assure superior surface finish. |
|
|
Hydraulic
Dressing Unit: Both
grinding wheel and regulating wheel dressing units are hydraulic
traversed. Traverse speed is infinitely adjustable. Dressing
slides are made of special alloy cast iron and hand scraping.
Assures smooth dressing and high accuracy. |
|
|
Rotary
Dressing Unit (optional accessories): Be
applicable to the CBN grinding wheel, diamond grinding wheel
or general abrasive grinding wheel. |
|
|
Pressure
Switch: One
pressure switch is provided in the grinding wheel spindle lubrication
system so that the spindle motor won't rotate while the lubrication
pressure is reduced. This prevents the spindle from dry running
and damage. |
|
|
Hydraulic
Oil Cooling Fan: During
grinding, it cools down hydraulic oil temperature and therefore
reduce size vibration also enhance grinding wheel spindle life. |
|
|
Upper
Slide: The
upper slide can be rapidly and precisely swivelled up to ±5°
in order to grind taper in infeed grinding and provide perfect
contact between workpiece and grinding wheel in thrufeed grinding. |
|
Model
|
RC-12 |
RC-16 |
RC-18 |
RC-1810 |
RC-1812 |
RC-20 |
| Grinding
range (dia.) |
0.04"~1.58" |
0.04"~2" |
0.04"~2" |
0.04~2" |
0.04"~2" |
0.04"~2" |
| Grinding
wheel size (dia.x width x hole) |
12"x6"x5" |
16"x8"x8" |
18"x8"x9" |
18"x10"x9" |
18"x12"x9" |
20"x8"x12" |
| Regulating
wheel size (dia.x width x hole) |
8"x6"x3.54" |
10"x8"x4.38" |
10"x8"x4.38" |
10"x10"x4.38" |
10"x12"x4.38" |
12"x8"x5" |
| Grinding
wheel speed |
2100rpm |
1550rpm |
1350rpm |
1350rpm |
1350rpm |
1200rpm |
| Regulating
wheel speed |
21~333rpm
(7 steps)
|
13~308rpm
(10 steps) |
13~308rpm
(10 steps) |
13~308rpm
(10 steps) |
13~308rpm
(10 steps) |
13~308rpm
(10 steps) |
| Grinding
wheel motor |
7-1/2HP
4P |
10HP
4P |
15HP
4P |
15HP
4P |
20HP
4P |
20HP
4P |
| Regulating
wheel motor |
1HP
6P/
1.3KW (servo motor) |
2HP
6P/
1.8KW (servo motor) |
2HP
6P/
1.8KW (servo motor) |
2HP
6P/
1.8KW (servo motor) |
2HP
6P/
2.9KW (servo motor) |
2HP
6P/
2.9KW (servo motor) |
| Hydraulic
pump motor |
1HP
4P |
1HP
4P |
1HP
4P |
1HP
4P |
1HP
4P |
1HP
4P |
| Coolant
pump motor |
1/8HP
2P |
1/4HP
2P |
1/4HP
2P |
1/4HP
2P |
1/4HP
2P |
1/4HP
2P |
| Upper
slide feed graduation |
3.5mm(rev.)
0.05mm(gra.) |
4mm(rev.)
0.05mm(gra.) |
4mm(rev.)
0.05mm(gra.) |
4mm(rev.)
0.05mm(gra.) |
4mm(rev.)
0.05mm(gra.) |
4mm(rev.)
0.05mm(gra.) |
| Upper
slide micro feed graduation |
0.1mm(rev.)
0.001mm(gra.) |
0.1mm(rev.)
0.001mm(gra.) |
0.1mm(rev.)
0.001mm(gra.) |
0.1mm(rev.)
0.001mm(gra.) |
0.1mm(rev.)
0.001mm(gra.) |
0.1mm(rev.)
0.001mm(gra.) |
| Lower
slide feed graduation |
7mm(rev.)
0.05mm(gra.) |
9mm(rev.)
0.05mm(gra.) |
9mm(rev.)
0.05mm(gra.) |
9mm(rev.)
0.05mm(gra.) |
9mm(rev.)
0.05mm(gra.) |
9mm(rev.)
0.05mm(gra.) |
| Lower
slide micro feed graduation |
0.2mm(rev.)
0.001mm(gra.) |
0.2mm(rev.)
0.001mm(gra.) |
0.2mm(rev.)
0.001mm(gra.) |
0.2mm(rev.)
0.001mm(gra.) |
0.2mm(rev.)
0.001mm(gra.) |
0.2mm(rev.)
0.001mm(gra.) |
| Dressing
device graduation |
1.25mm(rev.)
0.01mm(gra.) |
1.75mm(rev.)
0.01mm(gra.) |
2mm(rev.)
0.01mm(gra.) |
2mm(rev.)
0.01mm(gra.) |
2mm(rev.)
0.01mm(gra.) |
2mm(rev.)
0.01mm(gra.) |
| Regulating
wheel tile angle |
±5° |
±5° |
±5° |
±5° |
±5° |
±5° |
| Regulating
wheel swivel angle |
±5° |
±5° |
±5° |
±5° |
±5° |
±5° |
| Net
weight (approx.) |
3300
Lbs. |
4630
Lbs. |
5720
Lbs. |
5720
Lbs. |
7055
Lbs. |
7700
Lbs. |
| Shipping
gross weight (approx.) |
3860
Lbs. |
5280
Lbs. |
6380
Lbs. |
6380
Lbs. |
7930
Lbs. |
8370
Lbs. |
| Size
of case (approx.) LxWxH |
90"x44"x68" |
90"x72"x68" |
90"x80"x72" |
90"x80"x72" |
90"x86"x72" |
98"x80"x72" |
| Price |
Please
Contact Us for More Information |
|
Model
|
C12 |
C20 |
| General
Capacity |
|
|
| Max. grinding
dia. |
0.04~1.18" |
0.04~2" |
| Max. grinding
dia. w/ special workrest |
1.18~2" |
2~3.54" |
| Infeed
grinding range |
0.08~1.18" |
0.08~2" |
| Grinding
Wheel |
|
|
| Wheel
size (dia. x width x bore) |
12x5.5x5" |
20x8x12" |
| Spindle
speeds |
1900
rpm |
1070
rpm |
| Feed of
dressing handwheel per graduation |
0.00078" |
0.00039" |
| Feed of
dressing handwheel per revolution |
0.078" |
0.059" |
| Regulating
Wheel |
|
|
| Wheel
size (dia. x width x bore) |
8x51/2x31/2" |
12x8x5" |
| Spindle
speeds (10 steps) |
15~310
rpm |
13~308
rpm |
| Feed of
handwheel per graduation |
0.002" |
0.002" |
| Feed of
handwheel per revolution |
0.16" |
0.16" |
| Swiveling
angle (L & R) |
±5° |
±5° |
| Inclining
angle (for & rev) |
±5° |
±5° |
| Rapid
feed of saddle handwheel per grad. |
0.00125" |
0.0002" |
| Rapid
feed of saddle handwheel per rev. |
0.20" |
0.24" |
| Micro
feed of saddle handwheel per grad. |
0.00005" |
0.00005" |
| Micro
feed of saddle handwheel per rev. |
0.0008" |
0.00625" |
| Motors |
|
|
| Grinding
wheel motor |
5
HP |
20
HP |
| Hydraulic
motor |
1
HP |
2
HP |
| Weight |
|
|
| Net (approx.) |
2640
Lbs. |
6600
Lbs. |
| Gross
(approx.) |
3300
Lbs. |
7260
Lbs. |
| Packing |
|
|
| Length
x Width x Height |
70x53x65" |
89x82x85" |
