|
|
|
Pin Cut-Off Machine
|
|
RPC
GROMAX Rods Precision Cut-Off and Surface Grind
Machine
EPC GROMAX Ejector Pin Cut-Off Machine
|
| |
|
TOP
|
| GROMAX Rods Precision
Cut-Off & Surface Grind Machine |
|
| |
|
Features:
- Cut off ejector pins and grind
them to length in one set up
- Fast, economic way to grind
pins, rods
- Depth mic. attachment lets
you cut to desired length
- V-groove clamping mechanism
fits all sizes
- Built in diamond dresser for
easy dressing
- Short Pin Fixture available.
Please call for more information
|
|
| Specifications: |
Accessories: |
| Cut
off precision |
ø.98x11.8
0.0004" |
| Right
angle precision |
ø.98x90°
0.0004" |
| Max.
cut off length |
20" |
| Cut
off sander lamina (TxDia/Hole) |
0.0039"xø7.1"/1.25" |
| Grinding
sander |
WA46Kx0.39"x0.2"x0.79" |
| RPM |
3600
rpm |
| Motor |
3/4
HP |
| Weight |
200
Lbs. |
| Machine
Size |
17"x14"x20" |
|
| RPC.CW
|
Cut Off Wheel |
|
| RPC.GW20M |
Grinding
Wheel |
|
| RPC.DD
|
Diamond Dresser |
|
| RPC.PIN |
Small Pin Fitting
Divice |
|
| RPC.300MM |
Micro Meter
(300mm) |
|
| RPC.500MM |
Micro Meter
(500mm) |
|
| RPC.FLG |
Flange |
|
| RPC.BLT |
Belt |
|
|
| |
|
TOP
|
| GROMAX Ejector
Pin Cut-Off Machine |
|
| |
|
Features:
- Durable and compact
design
- Hardened clamping vise
to resist worn-out
- Quiet and clean operation
leaves no vibration, dust
and noise
- Emery wheel comes off
easily for replacement
- Simple to operate
|
|
| Max. cutting capacity |
ø.98x3.94"
(wide) |
| Cutting tolerance |
.79+.0039" |
| Emery wheel (O.D.
x Thickness x Bore) |
5.9"x.39"x.78" |
| Speed |
3600
rpm |
| Motor |
1/2
HP |
| Max. cut off length |
11.8" |
| Machine size |
24.4"x16.5"x17.7" |
| Weight |
189
Lbs. |
TOP
|
|
During
operation, the grinding sander may be micro adjusted and repaired
without changing its dimensions.
The
dimensions precision of cutting off the length of working
piece are not subject to the effect of the difference of thickness
of cutting-off sander piece.
The
tightness of belt may be automatically adjusted and controlled
(the larger the resistance, the tighter the belt).
The
rapid chuck is used to hold the working piece in place, opening
or closing it is very quick, and 0.04"-0.98"f
is the same.