|
SUBURBAN SineSet™
|
|
OVERVIEW
About SineSet™
SS Complete
SineSet™
SPC Compound Sine Plate
MC Magnetic Chuck
MSPC Magnetic Compound Sine Plate
MSP Magnetic Sine Plate
SP Sine Plate
|
| |
|
TOP
|
| SUBURBAN About
SineSet™ |
|
ABOUT
SineSet™
Throughout this page
you will see some part numbers with the suffix "S0", "S1" OR "S2".
This indicates that these tools are part of the Suburban SineSet
system. As part of the system, tools with the same suffix can be
bolted together without the use of clamps and with little OR no
indicating thus forming a different tool. An example of this system
would be the SP-66-S1 sine plate and the MC-66-S1 magnetic chuck;
separately they are a standard sine plate and a squaring chuck,
bolted together they become a magnetic sine plate. In addition to
the magnetic chucks there are angle plates, v-blocks, vises and
indexers that will mount to the sine plates. Just match up the part
number suffix to get the proper sine plate for the tools you need.
| |
| TOP |
| SUBURBAN
Complete SineSet™ |
|
| |
 |
Features:
- A
complete matched system of bolt-together precision
tools in a beautiful, fitted, wooden storage case,
at a significant savings.
- Each
set includes a SineSet®
sine plate OR compound sine plate, a max-C-mag™
magnetic chuck, a vise and an angle plate. The SS-0
sets also include a V-block.
- Each
set comes with all necessary locking straps, rails,
handles, bolts, screws & washers,
as well as the proper T-handle hex wrench.
- Sets
designated with a number ending in 'F' include a
fine pole magnetic chuck.
- Each
of these SineSet®
tools & many others, as well as the
storage cases, can be purchased separately.
|
| MODEL |
TOOLS
INCLUDED |
WT(#) |
PRICE |
SS-0AF
SS-0BF
SS-1A
SS-1AF
SS-1B
SS-1BF
SS-1C
SS-1CF
SS-1D
SS-1DF
|
SP-44-S0, AP-334-S0, V-225-S0, VB-222-S0 & MC-44-FP-S0
SPC-44-S0, AP-334-S0, V-225-S0, VB-222-S0 & MC-44-FP-S0
SP-66-S1, AP-664-S1, V-237-S1 & MC-66-S1
SP-66-S1, AP-664-S1, V-237-S1 & MC-66-FP-S1
SP-66-S1, AP-444-S1, V-237-S1 & MC-66-S1
SP-66-S1, AP-444-S1, V-237-S1 & MC-66-FP-S1
SPC-66-S1, AP-664-S1, V-237-S1
& MC-66-S1
SPC-66-S1, AP-664-S1, V-237-S1 & MC-66-FP-S1
SPC-66-S1, AP-444-S1, V-237-S1 & MC-66-S1
SPC-66-S1, AP-444-S1, V-237-S1 & MC-66-FP-S1
|
39
42
79
83
69
73
88
92
78
82
|
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
|
SPECIAL
SIZES AVAILABLE UPON REQUEST
| |
|
TOP
|
| SUBURBAN Compound
Sine Plate |
|
| |
 |
Features:
- Made of
steel, hardened to Rc 58-62.
- Sizes
up to 6" x 6" have 1/4-20 tapped
holes; larger sizes have 3/8-16 tapped holes.
- Models
with the suffix "S0, S1 OR S2" are
part of the SineSet® System; other products
with the same part # suffix will bolt directly to these
sine plates.
- Gage block
rolls have two 0.200" minute steps for setting
small angles with standard gage block sets.
- Locking
strap that always remains below the top surface is standard.
- Includes
two hardened & ground rails.
|
 |
| MODEL |
SIZE |
CENTER
DISTANCE
OF ROLLS |
SQUARE
&
PARALLEL |
WT(#) |
PRICE |
SPC-44-S0
SPC-66-S1
SPC-612-S2
SPC-618-S2
SPC-812-S2
SPC-1212-S2
SPC-1218-S2
|
4" x 4" x 3-1/8"
6" x 6" x 3-1/8"
12" x 6" x 4-3/16"
18" x 6" x 5-3/8"
12" x 8" x 4-3/16"
12" x 12" x 4-3/16"
18" x 12" x 5-3/8"
|
3" ±0.0002"
5" ±0.0002"
5" & 10" ±0.0002"
5" ±0.0002" &
15" ±0.0003"
5" & 10" ±0.0002"
10" ±0.0002"
10" & 15" ±0.0003"
|
0.0002"
0.0002"
0.0003"
0.0004"
0.0003"
0.0003"
0.0004"
|
13
27
71
134
93
137
257
|
Call
Call
Call
Call
Call
Call
Call
|
SPECIAL SIZES
AVAILABLE UPON REQUEST
| |
|
TOP
|
| SUBURBAN Magnetic
Chuck |
|
| |
    |
Features:
- Designed
to bolt directly with little OR no indicating
to a SineSet®
sine plate OR compound sine plate of the
same size and series to form a magnetic sine plate OR
magnetic compound sine plate.
- Can be
used alone as a parallel chuck. The 4" x 4" & 6" x 6"
models can also be used as squaring chucks.
- Made with
ceramic magnets for superior holding power that never
fades.
- Designed
to be bolted directly with little OR no indicating
to a SineSet®
sine plate OR compound sine plate of the same
size & series.
- All units
are lubricated and sealed against dirt & liquids.
Can be used in EDM machines.
- Includes
removable handle, side and back rail.
|
|
STANDARD
POLE (1/4 POLES & 1/8 SEPARATORS)
| MODEL |
SineSet®
SERIES |
LENGTH |
WIDTH |
WT(#) |
PRICE |
MC-66-S1
MC-612-S2
MC-618-S2
MC-812-S2
MC-1212-S2
MC-1218-S2
MC-1224-S2
|
1
2
2
2
2
2
2
|
6"
12"
18"
12"
12"
18"
24"
|
6"
6"
6"
8"
12"
12"
12"
|
21
42
65
58
100
151
202
|
Call
Call
Call
Call
Call
Call
Call |
FINE
POLE (1/8 POLES & 1/8 SEPARATORS)
| MODEL |
SineSet®
SERIES |
LENGTH |
WIDTH |
WT(#) |
PRICE |
MC-44-FP-S0
MC-66-FP-S1
MC-612-FP-S2
MC-618-FP-S2
MC-812-FP-S2
MC-1212-FP-S2
MC-1218-FP-S2
MC-1224-FP-S2
|
0
1
2
2
2
2
2
2
|
4"
6"
12"
18"
12"
12"
18"
24"
|
4"
6"
6"
6"
8"
12"
12"
12"
|
12
25
47
70
63
106
160
212
|
Call
Call
Call
Call
Call
Call
Call
Call |
| |
|
TOP
|
| SUBURBAN Magnetic
Compound Sine Plate |
|
| |
Features:
- All chucks
use ceramic magnets for superior holding power.
- Chucks
are lubricated and sealed against dirt and liquids.
- Removable
handle and two rails are included with chuck.
- Gage block
roll has two 0.200" minute steps for setting small
angles with standard gage block sets.
- Models
with the suffix "S0, S1 OR S2" are
part of the SineSet® System. The chuck
can be removed and other products with the same part
number suffix will bolt directly to these sine plates.
- Two self-storing,
hardened & ground rails included with
sine plate.
- Compound
sine plate portion made of steel, hardened to Rc 58-60.
- The magnetic
chuck can be quickly removed OR replaced on
SineSet models (those with part number suffix "S0,
S1 OR S2" ) using only four bolts, allowing
the individual use of both the sine plate and magnetic
chuck.
- STANDARD
POLE : 1/4" poles and 1/8" separators produce
deep flux lines for holding large and thick parts.
- FINE POLE:
(marked -FP) 1/8" poles and 1/8" separators
produce shallow flux lines for holding small and thin
parts.
|
|
| MODEL |
SIZE |
CENTER
DISTANCE
OF ROLLS |
SQUARE
&
PARALLEL |
WT(#) |
PRICE |
MSPC-44-FP-S0
MSPC-66**
MSPC-66-FP**
MSPC-66-FP-S1
MSPC-66-S1
MSPC-612-FP-S2
MSPC-612-S2
MSPC-618-FP-S2
MSPC-618-S2
MSPC-812-FP-S2
MSPC-812-S2
MSPC-1212-FP-S2
MSPC-1212-S2
MSPC-1218-FP-S2
MSPC-1218-S2
|
4" x 4" x 5-3/4"
6" x 6" x 5-3/8"
6" x 6" x 5-3/8"
6" x 6" x 5-3/4"
6" x 6" x 5-3/4"
12" x 6" x 6-13/16"
12" x 6" x 6-13/16"
18" x 6" x 8"
18" x 6" x 8"
12" x 8" x 6-13/16"
12" x 7" x 6-13/16"
12" x 12" x 6-13/16"
12" x 12" x 6-13/16"
18" x 12" x 8"
18" x 12" x 8"
|
3" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" & 10" ±0.0002"
5" & 10" ±0.0002"
5" ±0.0002" &
15" ±0.0003"
5" ±0.0002"
&
15" ±0.0003"
5" & 10" ±0.0002"
5" & 10" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" & 15" ±0.0003"
10" & 15" ±0.0003"
|
0.0002"
0.0002"
0.0002"
0.0002"
0.0002"
0.0003"
0.0003"
0.0004"
0.0004"
0.0003"
0.0003"
0.0003"
0.0003"
0.0004"
0.0004"
|
25
44
48
52
48
118
113
204
199
156
151
243
237
417
408
|
Call
Call
Call
Call
Call
Call
Call
Call
|
| |
|
TOP
|
| SUBURBAN Magnetic
Sine Plate |
|
| |
Features:
- All
chucks use ceramic magnets for superior holding power.
- Chucks
are lubricated and sealed against dirt and liquids.
- Removable
handle and two rails are included with chuck.
- Gage
block roll has two 0.200" minute steps for setting
small angles with standard gage block sets.
- Models
with the suffix "S0, S1 OR S2"
are part of the SineSet® System. The chuck
can be removed and other products with the same part
number suffix will bolt directly to these sine plates.
- Sine
plate includes two self-storing, hardened & ground
rails.
- Sine
plate portion made of steel, hardened to Rc 58-62.
- The
magnetic chuck can be quickly removed OR replaced
on SineSet®
models (those with part number suffix S0, S1 OR S2
) using only four bolts, allowing the individual use
of both the sine plate and magnetic chuck.
|
|
| |
STANDARD
POLE:
1/4"
poles and 1/8" separators produce deep flux lines
for holding large and thick parts.
FINE
POLE: (marked
- FP)
1/8" poles and 1/8" separators produce shallow
flux lines for holding small and thin parts.
|
 |
| MODEL |
SIZE |
CENTER
DISTANCE
OF ROLLS |
SQUARE
&
PARALLEL |
WT(#) |
PRICE |
MSP-363-FP*
MSP-44-FP-S0
MSP-66*
MSP-66-FP*
MSP-66-S1
MSP-66-FP-S1
MSP-612-S2
MSP-612-FP-S2
MSP-126-S2
MSP-126-FP-S2
MSP-618-S2
MSP-618-FP-S2
MSP-186-S2
MSP-186-FP-S2
MSP-812-S2
MSP-812-FP-S2
MSP-128-S2
MSP-128-FP-S2
MSP-1212-S2
MSP-1212-FP-S2
MSP-1218-S2
MSP-1218-FP-S2
MSP-1812-S2
MSP-1812-FP-S2
MSP-1224-S2
MSP-1224-FP-S2
MSP-2412-S2
MSP-2412-FP-S2 |
6" x 6" x 4-1/4"
4" x 4" x 4-5/8"
6" x 6" x 4-1/4"
6" x 6" x 4-1/4"
6" x 6" x 4-5/8"
6" x 6" x 4-5/8"
6" x 12" x 5-1/4"
6" x 12" x 5-1/4"
12" x 6" x 5-1/4"
12" x 6" x 5-1/4"
6" x 18" x 6"
6" x 18" x 6"
18" x 6" x 6"
18" x 6" x 6"
8" x 12" x 5-1/4"
8" x 12" x 5-1/4"
12" x 8" x 5-1/4"
12" x 8" x 5-1/4"
12" x 12" x 5-1/4"
12" x 12" x 5-1/4"
12" x 18" x 6"
12" x 18" x 6"
18" x 12" x 6"
18" x 12" x 6"
12" x 24" x 6-5/8"
12" x 24" x 6-5/8"
24" x 12" x 6-5/8"
24" x 12" x 6-5/8" |
5" ±0.0002"
3" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
10" ±0.0002"
10" ±0.0002"
5" ±0.0002"
5" ±0.0002"
15" ±0.0003"
15" ±0.0003"
5" ±0.0002"
5" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0003"
10" ±0.0003"
15" ±0.0003"
15" ±0.0003"
10" ±0.0004"
10" ±0.0004"
20" ±0.0004"
20" ±0.0004" |
0.0002"
0.0002"
0.0002"
0.0002"
0.0002"
0.0002"
0.0003"
0.0003"
0.0003"
0.0003"
0.0004"
0.0004"
0.0004"
0.0004"
0.0003"
0.0003"
0.0003"
0.0003"
0.0003"
0.0003"
0.0004"
0.0004"
0.0004"
0.0004"
0.0005"
0.0005"
0.0005"
0.0005" |
22
21
35
39
39
43
89
94
87
92
155
160
149
160
120
125
118
123
190
196
321
330
318
327
475
485
469
479 |
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call |
* Chucks
are not removable on these models and are not SineSet®
Compatible.
SPECIAL SIZES AVAILABLE UPON REQUEST
 |
Features:
- Made of
steel, hardened to Rc 58-62.
- Includes
two self-storing, hardened & ground rails.
- Sizes
up to 6" x 6" have 1/4-20 tapped
holes, larger sizes have 3/8-16 tapped holes. Model
# SP-555 has T-slots for 1/4" T-bolts.
- Gage block
roll has two 0.200" minute steps for setting small
angles with standard gage block sets.
- Models
with the suffix "S0, S1 OR S2" are
part of the SineSet® System; other products
with the same part # suffix will bolt directly to these
sine plates.
- Locking
strap that always remains below the top surface is standard.
|
|
| MODEL |
SIZE |
CENTER
DISTANCE
OF ROLLS |
SQUARE
&
PARALLEL |
WT(#) |
PRICE |
SP-136*
SP-44-S0
SP-555*
SP-66-S1
SP-612-S2
SP-126-S2
SP-618-S2
SP-186-S2
SP-812-S2
SP-128-S2
SP-1212-S2
SP-1218-S2
SP-1812-S2
SP-1224-S2
SP-2412-S2 |
6" x 3" x 2"
4" x 4" x 2"
6" x 5" x 2-1/4"
6" x 6" x 2"
6" x 12" x 2-5/8"
12" x 6" x 2-5/8"
6" x 18" x 3-3/8"
18" x 6" x 3-3/8"
8" x 12" x 2-5/8"
12" x 8" x 2-5/8"
12" x 12" x 2-5/8"
12" x 18" 3-3/8"
18" x 12" x 3-3/8"
12" x 24" x 4"
24" x 12" x 4"
|
5"±0.0002"
3" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
10" ±0.0002"
5" ±0.0002"
15" ±0.0003"
5" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0003"
15" ±0.0003"
10" ±0.0004"
20" ±0.0004" |
0.0002"
0.0002"
0.0002"
0.0002"
0.0003"
0.0003"
0.0004"
0.0004"
0.0003"
0.0003"
0.0003"
0.0004"
0.0004"
0.0005"
0.0005" |
9
9
17
18
47
45
90
84
62
60
90
170
167
273
267 |
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call
Call |
*Not SineSet®
Compatible
SPECIAL SIZES AVAILABLE UPON REQUEST
TOP
|
